AIR OPERATED DOUBLE DIAPHRAGM PUMP
Clamped Plastic AODD Pump 6 mm (1/4 in.)
Match materials, connections and drive to your operating requirements.
Maximum flow and maximum pressure are separate limits, not a simultaneous operating point. Selection depends on fluid, temperature, viscosity, suction conditions, drive and diaphragm configuration.
Technical specifications
| Parameter | Value |
|---|---|
| Drive | Compressed air |
| Air inlet | 1/8 in. FNPT |
| Liquid inlet | 6 mm (1/4 in.) |
| Liquid discharge | 6 mm (1/4 in.) |
| Maximum flow | 18.1 l/min (4.8 gpm) |
| Maximum pressure | 8.6 bar (125 psi) |
| Maximum solids diameter | 0.4 mm (1/64 in.) |
| Maximum dry suction lift | PTFE: 2.44 m (8 ft) |
| Maximum wet suction lift | PTFE: 8.84 m (29 ft) |
| Connection type | NPT/BSPT (threaded) |
| Weights / material variants | PP: 1.4 kg (3 lb);PVDF: 1.4 kg (3 lb) |
Before ordering
Confirm the full ordering code, diaphragm / ball / seat materials, operating temperature and performance at your duty point. A dash means the value is not specified.
Technical selection resources
Use the catalogue values as model data, then verify the complete duty before ordering.