AIR OPERATED DOUBLE DIAPHRAGM PUMP
Bolted Plastic AODD Pump 38 mm (1-1/2 in.)
Match materials, connections and drive to your operating requirements.
Maximum flow and maximum pressure are separate limits, not a simultaneous operating point. Selection depends on fluid, temperature, viscosity, suction conditions, drive and diaphragm configuration.
Technical specifications
| Parameter | Value |
|---|---|
| Drive | Compressed air |
| Air inlet | 3/4 in. FNPT |
| Liquid inlet | 38 mm (1-1/2 in.) |
| Liquid discharge | 38 mm (1-1/2 in.) |
| Maximum flow | 458 l/min (121 gpm) |
| Maximum pressure | 8.6 bar (125 psi) |
| Maximum solids diameter | 6.4 mm (1/4 in.) |
| Maximum dry suction lift | 5.6 m (18.4 ft) |
| Maximum wet suction lift | 9.0 m (29.5 ft) |
| Connection type | DIN/ANSI (flanged) |
| Weights / material variants | PP: 28 kg (62 lb);PVDF: 32 kg (70 lb) |
Before ordering
Confirm the full ordering code, diaphragm / ball / seat materials, operating temperature and performance at your duty point. A dash means the value is not specified.
Technical selection resources
Use the catalogue values as model data, then verify the complete duty before ordering.