AIR OPERATED DOUBLE DIAPHRAGM PUMP
Clamped Plastic AODD Pump 13 mm (1/2 in.)
Match materials, connections and drive to your operating requirements.
Maximum flow and maximum pressure are separate limits, not a simultaneous operating point. Selection depends on fluid, temperature, viscosity, suction conditions, drive and diaphragm configuration.
Technical specifications
| Parameter | Value |
|---|---|
| Drive | Compressed air |
| Air inlet | 1/4 in. FNPT |
| Liquid inlet | 13 mm (1/2 in.) |
| Liquid discharge | 13 mm (1/2 in.) |
| Maximum flow | TPE: 56.8 l/min (15 gpm) |
| Maximum pressure | 8.6 bar (125 psi) |
| Maximum solids diameter | 1.6 mm (1/16 in.) |
| Maximum dry suction lift | PTFE: 5.18 m (17 ft) |
| Maximum wet suction lift | PTFE: 9.8 m (32 ft) |
| Connection type | NPT/BSPT (threaded) |
| Weights / material variants | 4.0 kg (9 lb);5.0 kg (11 lb);6 kg (12 lb) |
Before ordering
Confirm the full ordering code, diaphragm / ball / seat materials, operating temperature and performance at your duty point. A dash means the value is not specified.
The three listed weights are not assigned to materials; 6 kg / 12 lb also requires confirmation.
Technical selection resources
Use the catalogue values as model data, then verify the complete duty before ordering.